Mold and mildew infestations are among the most common issues that homeowners face. This fungus can grow on anything and can flourish in any place that has access to moisture, particularly humid, poorly lit, warm, and poorly ventilated places. It releases a musty, nasty odor, and it can result in serious damage when left unchecked.
Mold can also trigger asthma attacks and allergies for individuals who are susceptible to them. This article is meant to guide you in the basics of mold removal. If the repairs are beyond your skillset, and you need more helpful information, then it’ll be best to visit a site to hire a mold professional. Read on to familiarize yourself with effective strategies for removing and keeping mold away.
1. Get Rid of Moisture and Lower the Humidity Level
Mold is a fuzzy substance that you can find developing on grout in a bathroom. It thrives in warm, damp areas. Thus, the best way to remove and prevent it is to clean the areas in a home where it is typically likely to grow and keep them dry. Clean your kitchen and bathroom on a regular basis. Remember to stretch out damp shower curtains and dry moist clothes quickly.
Basements tend to have moist air most of the time. You can leave a dehumidifier running in the basement to remove the moisture and lower the humidity level. An air conditioner can also help you keep the moisture away. It takes in warm air that holds a lot of moisture and circulates it into your house as cool, dry air.
2. Acquire the Right Cleaning Solutions
The market is full of affordable and effective cleaning solutions that can help you eliminate mold from your home. They include:
- Bleach: It is an effective cleaning agent, especially on moldy surfaces. However, it produces harsh fumes and toxic gases when it accidentally mixes with ammonia or other household cleaners. Don’t use it on porous materials such as drywall and wood. Pour 1 cup of bleach in a 1 gallon of water, and then with the aid of a spray bottle clean the moldy area. Don’t wipe the surface afterward to increase chances of stopping growth.
- Vinegar: Although vinegar is less effective than bleach, it is harmless and doesn’t produce harsh fumes. Use this cleaner on non-porous surfaces. Wash the mold-infested surface with undiluted vinegar, allow it to sit for 60 minutes, then wipe clean.
- Ammonia: Just like bleach, ammonia is useless on porous surfaces, and it is a hazardous chemical. Always use clear ammonia. Prepare a 50/50 mixture of water and clear ammonia and wash the moldy surface. Let it soak for several hours before wiping and rinsing it.
- Borax: It is safe and doesn’t release fumes, but dangerous if swallowed. Prepare a mix consisting of 1 cup of borax and 1 gallon of water, then use a scrubbing brush to clean the affected surface.
3. Thoroughly Clean the Mold-Infested Surface
Wear appropriate protective attire, such as a facemask and gloves, before you touch mold. With the aid of a sprayer, shower the moldy surface with a cleaning reagent like a blend of borate and bleach. Allow the solution to soak for a couple of minutes. Use a brush or any other scrubbing tool to scrub off mold that may have grown on a rough surface.
If mold has mounted up on wood or drywall and you cannot get rid of it by exhaustively cleaning the area, then you may have to eradicate the entire surface. If it has accumulated through drywall, identify the affected area and cut it out. Consider seeking assistance from a competent mold specialist, particularly when the mold removal process overwhelms you.
4. Repair The Source of the Mold
Apart from humidity, other factors like defective plumbing, cracks in the flooring, walls, or foundation, and leaky roofs can cause mold. Such defects must be fixed to prevent the mold problem from recurring. If identifying the source of the mold is a challenge, consider consulting with a reliable mold-abatement expert.
Mold removal goes beyond killing off the growth. It involves treating the environment appropriately to ensure the problem doesn’t recur. Decontaminating, sanitizing, enhancing ventilation, ad lowering moisture and humidity levels are dependable measures for keeping mold at bay.
Arthur Smith July 9, 2018
Posted In: Home Improvement